Reviewing CPU Threshold Configuration for a Device in Saner CVEM Console

Purpose

This article provides step-by-step instructions to review the CPU Threshold (%) set for a specific device within the Saner CVEM console.

Procedure

Follow the steps below to view the CPU threshold configuration:

1. Navigate to All Devices Page

   • Log in to the Saner CVEM console.

   • Go to the “All Devices” section from the left-hand navigation pane.

2. Identify the Device Configuration

   • In the “Configuration” column of the device table, note the configuration name applied to the device.
     

3. Access Agent Configuration Settings

   • Click on the Control Panel icon located in the top-right corner of the console.

4. Open Agent Configuration under Scanners

   • In the Control Panel, navigate to “Agent Configuration” under the Scanners section.

   • Select the respective account associated with the device.

5. Locate the Configuration Profile

   • Click on the relevant configuration (e.g., Debug Mode) from the list of available configurations.
     

6. Review CPU Threshold Settings

   • Scroll to the “Scan” section within the selected configuration.
      

   • You will find the CPU Threshold (%) value that has been set for the devices associated with this configuration.

Additional Notes

• The CPU threshold setting controls the percentage of CPU utilization allowed during a scan to prevent system performance degradation.

• Changes to the configuration may impact multiple devices linked to the profile.

Need Help?

If you require further assistance, please contact SecPod Support at:
support@secpod.com